Mouse roll-over to zoom image.
- High resolution input, VGA, HD to 4k
- High quality scaler and frame rate converter
- Bezel or gap correction
- Accepts dual-link DVI, single-link DVI or HDMI input
- Supports both DVI and analogue RGB output monitors
The Datapath x4 is a stand-alone display wall controller that accepts a standard single or dual-link DVI input and can flexibly display this across four output monitors.
Each output can be driven as DVI or analog RGB, and can represent an arbitrary crop region of the original input image. The output resolution and frame rate does not need to be related to that of the input, as the Datapath x4 display controller will optionally upscale and frame rate convert each cropped region independently.
|Dimensions||Datapath x4: 235 x 175 x 44mm (W x L x H)
Datapath x4-1U: 438 x 172 x 40mm (W x L x H)
|Outputs||4 x single-link DVI or Analog RGB outputs: To 165 Mpixel/s|
|Firmware Support||Updates supported via USB|
|USB 2.0||Full Speed (12 bit/s) operation supported|
|Input Surface||4k x 4k maximum|
|Output Screens Resolutions||Up to 2.5 Mpixel (maximum 2048 pixels in either directions)|
|1 x dual-link DVI-D capture||To 330 Mpixel/s|
|Arbitrary Up Scaling||64 x original surface area|
|Temperature||Operating Temperature: 0-35 Deg°C / 32-96°F|
|Power Requirements||5V DC, 18W
Datapath x4: Universal mains (100-240V) adapter supplied
Datapath x4-1U: Internal PSU (100-240V)
|Cooling||Internal cooling fans in both models
Note: x4-1U has a larger fan, producing less noise
Rent from a Partner, Not a Competitor
& Technical support
Same Day Delivery
to Most Major Cities
A Large Inventory of
With locations across the country, Rentex can deliver to most major cities.
To reach local support, simply click on the location below. For Rental Emergency Support, call (866) 541-3465