Product Highlights
- Bi-directional send and receive over a single fiber link
- Supports standard Ethernet inputs up to 1Gb
- Fiber connection speed always 1Gb
- Closed loop WDM fiber system
- Auto (10/100/1000) electrical port speed detection
Overview
The yellobrik OBD 1510 E Ethernet to 1Gbit Fiber Bi-directional Transceiver Pair from Lynx Technik AG is a matched pair of compact Ethernet switches designed to extend the reach of electrical Ethernet signals over long distances. The two switches are linked via a single bi-directional fiber link, which operates at a constant 1Gb speed.
This pair of modules uses WDM fiber technology in a closed loop arrangement and essentially functions as an Ethernet extender solution. The fiber link supports distances up to 6.2 mi (10km) and provides a single, high-speed 1Gb error-free optical connection between the two locations.
Each OBD 1510 E module has two standard RJ-45 electrical Ethernet ports and the complete system functions as a 4-port Ethernet switch, providing two standard RJ-45 Ethernet ports at each location bridged with fiber. For legacy systems, each electrical Ethernet port can be set for automatic speed detection (10/100/1000 Mb/s) or forced to 10Mb. Each port uses auto crossover detection or can be forced manually if needed. These functions are available using the dip switch.
Auto (10/100/1000) electrical port speed detection
You can manually force 10Mb electrical speed
Auto or manual electrical crossover selection
This pair of modules uses WDM fiber technology in a closed loop arrangement and essentially functions as an Ethernet extender solution. The fiber link supports distances up to 6.2 mi (10km) and provides a single, high-speed 1Gb error-free optical connection between the two locations.
Each OBD 1510 E module has two standard RJ-45 electrical Ethernet ports and the complete system functions as a 4-port Ethernet switch, providing two standard RJ-45 Ethernet ports at each location bridged with fiber. For legacy systems, each electrical Ethernet port can be set for automatic speed detection (10/100/1000 Mb/s) or forced to 10Mb. Each port uses auto crossover detection or can be forced manually if needed. These functions are available using the dip switch.
Auto (10/100/1000) electrical port speed detection
You can manually force 10Mb electrical speed
Auto or manual electrical crossover selection
Specifications
| Ethernet | 2 x Ethernet ports, RJ-45 Connectors 10 BaseT UTP category 3,4 or 5 cable up to 328ft/100m (2 pairs) 100 BaseT XUTP category 5 cable up to 328ft/100m (2 pairs) 1000 BaseT XUTP category 5 cable up to 328ft/100m (4 pairs)Auto detect bit rate (10/100/1000 Mb/s), or force to 10 Mb for each port (selectable) Automatic crossover detection or force manually for each port (selectable) Port speed / activity LED indication (next to Ethernet port) |
| Fiber optic | 1 x fiber optic I/O port (bidirectional)Simplex (single mode) using LC/PC connection WDM using 1310 nm and 1550 nm wavelengths Optical budget = 18 dB Fiber TX active and RX active LEDs on side of module Maximum distance 6.2 miles (10.0 km) singlemode |
| Power | +12 VDC power supply (included)Supports external power input from 9 to 14 VDC Power LED on side of module |
| Dimensions (L x W x H) | Each Module: 4.72 x 1.65 x 8.66″ (12.00 x 4.20 x 22.00 cm) |
| Weight | Each Module: 4.4 oz (125.0 g) |
Lynx Technik AG Yellobrik Ethernet to Fiber
OBD 1510 E Ethernet to 1Gbit Fiber Bi-directional Transceiver Pair
- Rentex No. GIGFIBYELL
- Mfr No. O BD 1510 E
-
Available for same-day delivery in most major cities
-
Item is show-ready, double-tested for functionality
-
Accessories included, matched to the main unit
