Product Highlights
- DisplayPort 1.2 & HDMI 1.4 Input
- Flexible Video Wall Configuration
- Up to 4096 x 2160p Input at 60 fps
- 4 x HDMI 1.3 Outputs
- Rotates, Crops & Scales and Multiple Controllers Can Be Looped
Overview
Specifications
| Video Input Connectors | 3G-SDI (1080p/60 or equivalent up to 148.5 MP/s) DisplayPort 1.2 (2160p/60 or equivalent up to 616 MP/s) HDMI 1.4 (2160p/30 or equivalent up to 297 MP/s) |
| Video Output Connectors | 4 x 3G-SDI (1080p/60 or equivalent up to 165 MP/s) Loop-Through: DisplayPort 1.2 (locked to selected video input resolution) |
| SMPTE Standards Supported | SMPTE ST 2048, up to 60 Hz SMPTE 274M, up to 60 Hz SMPTE 296M, up to 60 Hz |
| Input | 4096 x 2160p at 60, 8K x 8K maximum |
| Genlock Input | Analog black-burst on dedicated BNC connector Any video input (SDI, HDMI, DisplayPort) |
| Control Interfaces | 2 x 100BaseT Ethernet ports with built-in managed switch USB 2.0 Type-B connector (full-speed operation) |
| Firmware Updates | Via USB and Ethernet connection |
| Power Requirements | 100 to 240 VAC, 50/60 Hz, 35 W IEC switched and fused mains connector |
| Operating Temperature | 32 to 96°F / 0 to 35°C |
| Storage Temperature | -4 to 158°F / -20 to 70°C |
| Relative Humidity | 5 to 90% non-condensing |
| Dimensions | 12.4 x 6.8 x 1.7″ / 31.6 x 17.2 x 4.2 cm |
| Weight | 4.1 lb (1.86 kg) |
Technical Documentation
Datapath Fx4-HDMI
Display Wall Controller
- Rentex No. IPFX4HDMI
- Mfr No. DATAPATH FX4/H
-
Available for same-day delivery in most major cities
-
Item is show-ready, double-tested for functionality
-
Accessories included, matched to the main unit
Recommended Products
Gefen DVI Detective Plus
Displays use EDID - Extended Display Identification Data - to communicate to computers and HDTV sources the array of video resolutions and timings that they are capable of displaying. In certain situations this data can be lost resulting in incorrect display settings, or even a complete loss of video. The DVI Detective Plus solves this problem by ensuring that a correct EDID signal is constantly available to the DVI source - even if the display is switched to a different computer. After the simple EDID recording process is completed, the DVI Detective Plus is placed at the DVI output of the computer's video card where it will provide the computer with a constant EDID signal. The Detective Plus is equipped with DVI ports, but it is also compatible with VGA through the use of optional adapters. The DVI Detective Plus provides all the functionality of the DVI Detective N and adds HDCP pass through and the ability to use one of five pre-programmed EDID profiles.
Blackmagic Design ATEM Mini Extreme ISO
8x2 Streaming Switcher with Webcam Function and ISO Recording
