Mouse roll-over to zoom image.
- Ethernet for real-time control
- Decodes NTSC, PAL, and SECAM
- DVI & SDI inputs and outputs
- High-performance video scaler, scan converter, switcher and transcoder all rolled into one
- Converts RGB, HDTV, component, s-video, composite (NTSC, PAL and SECAM) and HD/SDI video into a user-selectable video format
The Barco ImagePro HD is a powerful all-in-one signal processor that accepts a wide range of video input signals and processes them into various signal formats to meet a number of applications. This device performs as a scan converter, switcher and transcoder in one base unit. This model features DVI and SDI inputs and outputs.
|Input||High Resolution video x4, looping, RGBHV,RGB or YUV, 0.7 Vpp @ 75 ohm or HiZ, On HD-15 connectors, a DVI connector and 5 BNC connectors SDI Video, Looping, SD and HD, on a BNC connector Genlock, looping, on a BNC connector RS-232, looping, on a 9-Pin connector Ethernet, on an RJ-45 connector|
|Output||Composite video, 1 Vpp @ 75 ohms, on a BNC connector Component video, looping, RGB or YUV, 0.7 Vpp @ 75 ohm or HiZ, 3 BNC connectors Y/C (S-Video), Y: 1 Vpp C: 0.3 Vpp, @ 75 ohms, on a 4-Pin connector RGBHV, RGBS, @ 75 ohms, Various Resolutions and Refresh Rates, on 5 BNC connectors or an HD-15 connector SDI Video, SD and HD, on a BNC connector|
|Conversion||Input: RGBHV, RGB, RGBS, YUV, SDI, HDTV Composite and Y/C Video NTSC and PAL Various Resolutions and Refresh Rates from VGA to HDTV Interlaced and Non-Interlaced Various Aspect Ratios
Output: RGBHV, RGB, RGBS, YUV, SDI, HDTV Composite and Y/C Video NTSC, SECAM and PAL Various Resolutions and Refresh Rates from VGA to HDTV Interlaced and Non-Interlaced Various Aspect Ratios
|Control||Front Panel, RS-232, Optional IR Remote: Input Selection x4 Chroma and Tint Brightness and Contrast Detail Size Center Zoom Fine Tuning of All Set Up Parameters Through Menu|
|Power Source||100 to 250 VAC, 50/60 Hz|
|Dimensions (WxDxH)||17.5 x 13 x 1.75″ 44.5 x 33 x 44.5cm|
|Weight||9 lbs 4 kg|