Product Highlights

32x32 Wideband Switcher with 3G SDI
Transmits 1080p @ 60Hz
600MHz at -3dB Bandwidth
+/-1.0dB to 300MHz Flatness
Switches / Distributes without Artifacts
Genlock Input
Formats Supported: DVB-ASI, SMPTE 259M, SMPTE292M, SMPTE 424M; 270M bps - 2.97GBps; 2K, 2048x1556/23.98 and 24

Overview

The Barco MatrixPRO-II 32×32 Switcher with 3G SDI combines a high 600MHz bandwidth with a flat +/-1.0dB to 300MHz frequency to deliver image switching and signal distribution without any artifacts. A genlock input synchronizes all switching with the house sync. A user selectable RGB delay mode locks down-stream equipment to a new signal before anything is visible on the screen. And presets are available to be stored and allow easy system reconfiguration. I/O grouping and split-mode switching features divide the matrix into smaller sub switchers and let each color channel switch independently.

Specifications

Supported Formats

DVB-ASI, SMPTE 259M, SMPTE 292M, SMPTE 424M; 270M bps – 2.97Gbps; 2K, 2048×1556/23.98 and 24

Inputs
Standard	SMPTE 259M / SMPTE 292M / SMPTE 424M
Data Rate	270Mbps – 1.485Gbps / 2.97Gbps
Connector	75 ohm BNC female
Impedance	75 ohm nominal
Return Loss	> 15dB (5MHz – 1.485GHz); > 10dB (1.5 – 3GHz)
Cable Equalization	Automatic up to 230′ (70m) @ 2.97Gbps, typical Belden 1694A Automatic up to 328′ (100m) @ 1.485Gbps, typical Belden 1694A Automatic up to 984′ (300m) @ 270Mbps, typical Belden 8281

Outputs
Connector	75 ohm BNC female
Impedance	75 ohm nominal
Return Loss	> 15dB (5MHz – 1.485GHz); > 10dB (1.5 – 3GHz)
Signal Level	800mVp-p ±10%
Rise & Fall	– 20 – 80% – SD limit: 0.4 – 1.5ns, < 0.5ns rise/fall variation – HD limit: < 270ps, < 100ps rise/fall variation – 3G-HD limit: < 135ps, < 50ps rise/fall variation
Amplitude Overshoot	< 10%
Signal Polarity	Non-inverting electrical with respect to inputs

Power & Other Parameters
Power	35W
Signal Speed	Timing jitter: SD: < 0.2 UI; 3G-HD/HD: < 1UI Alignment jitter: SD: < 0.2UI; 3G-HD/HD: < 0.2UI
Safety Regulations	Compliant with CE EN55103-1 and 2
Control	Serial port: RS-232, DB9 connector female Ethernet port: 10/100BaseT Ethernet bus, 1x RJ45 connector
Rack Mount	2RU
Dimensions	3.5 x 19 x 2″ (8.8 x 48.3 x 5 cm)
Weight	4.8 lbs (2.2 kg)