Narrow by:

DataPath DL8

DataPath DL8

DVI Dual Link Matrix

DataPath DL8

The Datapath dL8 is an eight output distribution amplifier for ultra-high resolution Dual Link DVI signals providing a programmable, flexible and low cost solution for any video wall display. When used in conjunction with multiple Datapath x4 wall controllers, the number of supported outputs increases four times per x4. This allows for the creation of large video walls and can display a single input to a video wall with as many as 100+ screens. Input content can be cropped, sliced, rotated to display unique content on any area of the displays.

One dual-link DVI output, supporting graphics sources with pixel clocks up to 330MHz and resolutions beyond Quad-HD (3480 x 2160), can be delivered to eight outputs on separate DVI-D (dual-link) connectors. This Distribution Amplifier supports up to 65 feet even at full dual-link resolutions due to additional active equalization and re-clocking hardware, allowing convenient location for flexible display designs.

The Datapath dL8 is an eight output distribution amplifier for ultra-high resolution Dual Link DVI signals providing a programmable, flexible and low cost solution for any video wall display. When used in conjunction with multiple Datapath x4 wall controllers, the number of supported outputs increases four times per x4. This allows for the creation of large video walls and can display a single input to a video wall with as many as 100+ screens. Input content can be cropped, sliced, rotated to display unique content on any area of the displays.

One dual-link DVI output, supporting graphics sources with pixel clocks up to 330MHz and resolutions beyond Quad-HD (3480 x 2160), can be delivered to eight outputs on separate DVI-D (dual-link) connectors. This Distribution Amplifier supports up to 65 feet even at full dual-link resolutions due to additional active equalization and re-clocking hardware, allowing convenient location for flexible display designs.

SKU: DADVIDL8 Categories: Multiviewers & Multi-Displays, Video

AJA HDP2 Mini Converter

HD-SDI/SDI to DVI-D and Audio Converter

AJA HDP2 Mini Converter

The HDP2 is a miniature HD-SDI/SDI to DVI-D converter for digital display devices, such as LCD, DLP, and Plasma monitors or projectors. Using a very high quality scaling engine and de-interlacer, the HDP2 will automatically size 4:3 or 16:9 inputs to many DVI-D monitors. For appropriate monitor configurations, scaling is automatically 1 to 1-for example, displaying 1920x 1080 video on a WUXGA (1920×1200) monitor. The HDP2 will also automatically adapt the input frame rate for monitor compatibility. In addition, the HDP2 provides 2 channel audio monitoring and a looping output of the SDI input.

The HDP2 also supports HDMI v1.3a Deep Color (with a DVI to HDMI cable). In the HDMI mode, Deep Color is supported at 30 bits per pixel with 8 channel audio. USB connectivity allows for easy PC/Mac setup and field upgrades.

SKU: CNVHDP2 Categories: Converters, Video

DataPath X4

DataPath X4

Quad Matrix Display Controller

DataPath X4

The Datapath x4 is a stand-alone display wall controller that accepts a standard single or dual-link DVI input and can flexibly display this across four output monitors.

Each output can be driven as DVI or analog RGB, and can represent an arbitrary crop region of the original input image. The output resolution and frame rate does not need to be related to that of the input, as the Datapath x4 display controller will optionally upscale and frame rate convert each cropped region independently.

SKU: IPX4DVI Categories: Multiviewers & Multi-Displays, Video

AJA DisplayPort to SDI

AJA DisplayPort to SDI

Mini-Converter with ROI Scaling

AJA DisplayPort to SDI

Efficiently incorporate DisplayPort computer signals into the video world with this compact ROI-DP DisplayPort to SDI Mini-Converter, from AJA. Using a simple-to-use free-download MiniConfig application (Mac/PC), select only the region of interest (portion of the image) you want converted, designate how you want the region scaled, and assign the aspect ratio and frame-rate conversion you want.

This converter also features a 3.5mm audio input for connecting separate audio to be embedded, a genlock reference input for locking the SDI signal output, and a DisplayPort loop-through output for keeping a connection to a local DisplayPort monitor during the SDI extract.

SKU: CNVROIDP Categories: Converters, Video

CatchBox Pro

Throwable Mic

CatchBox Pro

CatchBox Pro is a module that allows professionals to convert their existing beltpack transmitters into throw-able microphones. No need to buy new transmitters and receivers or change existing integrated systems, simply connect your existing beltpack into the Catchbox Pro.

SKU: CATCHBOX Categories: Microphone Accessories, Microphones, Traditional Wireless, Wireless Microphones

Barco ImagePRO-II

Barco ImagePRO-II

All-in-One Video Scaler, Scan Converter and Switcher

Barco ImagePRO-II

ImagePRO-II is an advanced high performance all-in-one video scaler, scan converter, switcher and transcoder converting any input signal format to any output format. ImagePRO-II supports Universal Analog, DVI single and dual link, HDMI, DisplayPort and SD/HD/3G SDI signal formats. Loop-through outputs are provided for the Analog, DVI and SDI input and genlock signals. With features like HDCP and EDID management, USB back up and restore, multiple video effects and web page interface, ImagePRO-II is the most advanced and flexible signal processor in the industry.

Next generation Athena scaler

Incorporating the 5th generation of the Athena scaler – Barco’s custom-designed image processing technology, ImagePRO-II supports higher resolutions, higher frame rates, higher quality de-interlacing with advanced Motion Adaptive processing, faster source acquisition, better color depth and native support for all the latest computer formats. As formats and interface requirements frequently change, the Athena scaler is built to be adaptable providing superior signal clarity, while maintaining a low processing latency of only one frame.

Simple setup and advanced control

Whether you are saving a setup for later, or need to copy a setup to multiple units, the incorporated USB back up and restore functionality makes configuration simple and efficient. ImagePRO-II is easily controlled via the front panel, browser or a mobile device. Featuring the fastest automatic source acquisition available, the ImagePRO-II excels in automatically acquiring and locking to any input signal. On the output side, ImagePRO-II can also automatically determine the format of the attached display optimizing its output resolution to match the display’s resolution.

SKU: IPIPRO2 Categories: Converters, Signal Processors, Video

Barco MatrixPRO-II

Barco MatrixPRO-II

16x16 DVI Router

Barco MatrixPRO-II

The MatrixPRO-II 16×16 DVI Router from Barco is an HDCP compliant video signal matrix router that can switch any of the 16 DVI inputs to any or all of the 16 outputs. Any input source, such as a DVD player, Blu-ray player, or a computer with high-resolution graphics, can be routed to a DVI or HDMI (via an optional adapter) output digital display.

The router accepts input resolutions from 480p up to 2048×1080 and 1920×1200. Each input is re-clocked as it passes through the router to maintain the DVI signal strength. Each channel can be programmed with unique EDID information based on the system requirements. In addition to the 16 outputs, the router features a monitoring output to which any input can be routed to and allows you to monitor and verify the input signal before it is switched to the output.

SKU: RTRDVI16XB Categories: Switchers & Routers, Video

Barco MatrixPRO from Rentex

Barco MatrixPRO-II 16×16

3G/HD-SDI High-Speed Serial Router

Barco MatrixPRO-II 16×16

The Barco MatrixPRO-II 16×16 Switcher with 3G SDI combines a high 600MHz bandwidth with a flat +/-1.0dB to 300MHz frequency to deliver image switching and signal distribution without any artifacts.

A genlock input synchronizes all switching with the house sync. A user-selectable RGB delay mode locks down-stream equipment to a new signal before anything is visible on the screen. And presets are available to be stored and allow easy system reconfiguration. I/O grouping and split-mode switching features divide the matrix into smaller sub-switchers and let each color channel switch independently.

Control can be by front panel buttons, by RS232, or via Ethernet connections. The switcher also fully integrates with Barco’s Encore and ScreenPRO-II presentation systems and can be controlled through them.

SKU: RTR3G16XB Categories: Switchers & Routers, Video

BlackMagic DVI to HD/SD-SDI

BlackMagic DVI to HD/SD-SDI

With DVI Extender

BlackMagic DVI to HD/SD-SDI

Route your computer’s desktop output anywhere using regular SDI cables. DVI Extender can be used in extender mode for routing your desktop output to another monitor or in video mode for converting the DVI-D output to SD/HD-SDI video signals for input into live switchers, decks and more. DVI Extender is USB powered and small enough to use in any location.

SKU: CNVBMDDS Categories: Converters, Video

Barco MatrixPRO-II 32x32

Barco MatrixPRO-II 32×32

3G SDI Switcher

Barco MatrixPRO-II 32×32

The Barco MatrixPRO-II 32×32 Switcher with 3G SDI combines a high 600MHz bandwidth with a flat +/-1.0dB to 300MHz frequency to deliver image switching and signal distribution without any artifacts.

A genlock input synchronizes all switching with the house sync. A user selectable RGB delay mode locks down-stream equipment to a new signal before anything is visible on the screen. And presets are available to be stored and allow easy system reconfiguration. I/O grouping and split-mode switching features divide the matrix into smaller sub switchers and let each color channel switch independently.

SKU: RTR3G32XB Categories: Switchers & Routers, Video

Decimator MD-QUAD

Decimator MD-QUAD

3G/HD/SD-SDI Quad Split Multi-Viewer with SD/HD/3G-SDI & HDMI Outputs Version 3

Decimator MD-QUAD

Description

2Updates
3General
4Menu Options

Version 3 of the DECIMATOR MD-QUAD 3G/HD/SD-SDI Quad Split Multi-Viewer with SD/HD/3G-SDI & HDMI Outputs adds a test pattern generator, audio tone generator, audio channel pass through, and on-screen display on an optional connected monitor. The device provides you with an SD/HD/3G-SDI quad splitter or multiplexer. It features four auto detecting SDI inputs, and outputs to an SDI and an HDMI output.

Each input is independent and features low latency buffering, which allows the device to display all four inputs on an optional monitor screen simultaneously, even when each input signal is a different format or frame rate. The output signal also supports different aspect ratios being displayed on the screen of your monitor's SDI or HDMI input. A rotary encoder and push button selector allows you to navigate and select from the menu option without setting DIP switches or connecting to a computer. The menu function allows you to select your output format, and a locking power socket minimizes the chance of power loss by a kick out of the power cable.

SKU: MVWDECI4 Categories: Converters, Video

DECIMATOR MD-HX

DECIMATOR MD-HX

Miniature HDMI/SDI Cross Converter with Scaling & Frame Rate Conversion

DECIMATOR MD-HX

Combining capabilities usually reserved for a computer controlled converter the DECIMATOR MD-HX Miniature HDMI/SDI Cross Converter with Scaling & Frame Rate Conversion is a small independent device that features the same proven cross converter found in DECIMATOR’s larger MD-DUCC. The MD-HX features both an HDMI and a 3G-SDI input, and can cross convert either signal to the other. It features a built-in scaler and frame rate converter as well, allowing you to convert the input signal to your required output standard.

The MD-HX features one HDMI output and two pairs of 3G-SDI outputs, controllable via fourteen selectable conversion modes, providing you with a variety of modes to fit your needs. This converter does not require a computer or DIP switches to control as it incorporates a small LCD screen for menu functions, and four buttons for control. It comes with a power supply with locking power cable to prevent accidental power loss during use.

SKU: CNVDECHX Categories: Converters, Video

Extron 4×1

VGA Switcher

Extron 4×1

The SW VGA Series are VGA switchers with two, four, six, or eight inputs. They are designed for applications where multiple high resolution computer video or HDTV component video signals must be switched to one or two displays. The eight input SW VGA switcher offers dual buffered video and audio outputs, which eliminates the additional cost of a VGA and audio distribution amplifier for dual-display applications. The SW VGA Series switchers are ideal for small to mid-sized applications where high resolution switching is needed.

SKU: VGA4X1E Categories: Switchers & Routers, Video

VS-M226-A-Fujinon-Vari-Focal-Lens

Fujinon VS-M226-A

Lens for CV345

Fujinon VS-M226-A

SKU: FJYV27X22 Categories: Cameras/Camcorders/Lenses, Mini-Broadcast POV Cameras

Gefen DVI Detective Plus

Gefen DVI Detective Plus

Gefen DVI Detective Plus

Displays use EDID – Extended Display Identification Data – to communicate to computers and HDTV sources the array of video resolutions and timings that they are capable of displaying. In certain situations this data can be lost resulting in incorrect display settings, or even a complete loss of video. The DVI Detective Plus solves this problem by ensuring that a correct EDID signal is constantly available to the DVI source – even if the display is switched to a different computer. After the simple EDID recording process is completed, the DVI Detective Plus is placed at the DVI output of the computer’s video card where it will provide the computer with a constant EDID signal. The Detective Plus is equipped with DVI ports, but it is also compatible with VGA through the use of optional adapters.

The DVI Detective Plus provides all the functionality of the DVI Detective N and adds HDCP pass through and the ability to use one of five pre-programmed EDID profiles.

SKU: EDIDDVIG Categories: Converters, Video

Rentex Locations

With locations across the country, Rentex can deliver to most major cities.

Anaheim, CA

Boston, MA (HQ)

Chicago, IL

Dallas, TX

Ft. Lauderdale, FL

Las Vegas, NV

Nashville, TN

New York, NY

Orlando, FL

Philadelphia, PA

Phoenix, AZ

San Francisco, CA

Washington D.C.