Barco MatrixPRO-II 32×32

3G SDI Switcher

Barco

Product Highlights

  • 32×32 Wideband Switcher with 3G SDI
  • Transmits 1080p @ 60Hz
  • 600MHz at -3dB Bandwidth
  • +/-1.0dB to 300MHz Flatness
  • Switches / Distributes without Artifacts
Rentex No. RTR3G32XB | Mfr No. R9004662

The Barco MatrixPRO-II 32×32 Switcher with 3G SDI combines a high 600MHz bandwidth with a flat +/-1.0dB to 300MHz frequency to deliver image switching and signal distribution without any artifacts.

A genlock input synchronizes all switching with the house sync. A user selectable RGB delay mode locks down-stream equipment to a new signal before anything is visible on the screen. And presets are available to be stored and allow easy system reconfiguration. I/O grouping and split-mode switching features divide the matrix into smaller sub switchers and let each color channel switch independently.

Supported Formats DVB-ASI, SMPTE 259M, SMPTE 292M, SMPTE 424M; 270M bps – 2.97Gbps; 2K, 2048×1556/23.98 and 24

 

Inputs
Standard SMPTE 259M / SMPTE 292M / SMPTE 424M
Data Rate 270Mbps – 1.485Gbps / 2.97Gbps
Connector 75 ohm BNC female
Impedance 75 ohm nominal
Return Loss > 15dB (5MHz – 1.485GHz); > 10dB (1.5 – 3GHz)
Cable Equalization Automatic up to 230′ (70m) @ 2.97Gbps, typical Belden 1694A Automatic up to 328′ (100m) @ 1.485Gbps, typical Belden 1694A Automatic up to 984′ (300m) @ 270Mbps, typical Belden 8281

 

Outputs
Connector 75 ohm BNC female
Impedance 75 ohm nominal
Return Loss > 15dB (5MHz – 1.485GHz); > 10dB (1.5 – 3GHz)
Signal Level 800mVp-p ±10%
Rise & Fall – 20 – 80% – SD limit: 0.4 – 1.5ns, < 0.5ns rise/fall variation – HD limit: < 270ps, < 100ps rise/fall variation – 3G-HD limit: < 135ps, < 50ps rise/fall variation
Amplitude Overshoot < 10%
Signal Polarity Non-inverting electrical with respect to inputs

 

Power & Other Parameters
Power 35W
Signal Speed Timing jitter: SD: < 0.2 UI; 3G-HD/HD: < 1UI Alignment jitter: SD: < 0.2UI; 3G-HD/HD: < 0.2UI
Safety Regulations Compliant with CE EN55103-1 and 2
Control Serial port: RS-232, DB9 connector female Ethernet port: 10/100BaseT Ethernet bus, 1x RJ45 connector
Rack Mount 2RU
Dimensions 3.5 x 19 x 2″ (8.8 x 48.3 x 5 cm)
Weight 4.8 lbs (2.2 kg)

 

Rent from a Partner, Not a Competitor

24/7 Sales
& Technical support

24/7 Audio Video Rentals

Same Day Delivery
to Most Major Cities

24/7 Audio Video Rentals

Competitive
Subrental Pricing

24/7 Audio Video Rentals

A Large Inventory of
High-Quality Equipment

24/7 Audio Video Rentals

Best-in-Class
QC Process

24/7 Audio Video Rentals