Extron 6×1
RGBHV Switcher
Product Highlights
- 350 MHz (-3 dB) RGB video bandwidth
- Compatible with RGBHV, RGBS, RGsB, RsGsBs, HDTV component video, S-video, and composite video signals
- Automatically detects which inputs have an active signal and reports this information through the RS-232 port
- Inputs: Two, four, and six input analog RGBHV models with or without stereo audio; video on BNC connectors; audio on captive screw connectors
- Output: One set of female BNC connectors for video; one captive screw connector for audio
Rentex No. SWRGBHV6X
|
Mfr No. 60-493-21
The Extron SW6 RGBHV is a high performance, six input RGBHV switcher using BNC connectors. The switcher allows multiple RGBHV, RGBS, RGsB, RsGsBs, HDTV component video, S-video, or composite video sources to be switched to one compatible display device. With 350 MHz (-3 dB) RGB video bandwidth, it supports a wide array of high resolution signals.The SW6 RGBHV provides multiple control options including front panel, RS-232, contact closure, and auto-input switching. The auto-input switch function can be enabled or disabled via a toggle switch on the back panel. The SW6 RGBHV is housed in a 1U, rack-mountable metal enclosure and ships with rack ears.
The SW6 RGBHV can be controlled through a 9-pin remote control port which enables RS-232 control, as well as contact closure control. It is also compatible with the Extron KP 6 Keypad Remote Control and the Extron IR 102 Kit IR remote.
There are no Technical Documents available at the moment.
Please call us at (800) 574-1702 for more information.
Please call us at (800) 574-1702 for more information.
| SW2/4/6 RGBHV and SW2/4/6 RGBHV A | |||
| Video | |||
|---|---|---|---|
| Â Â Â Gain | Unity. | ||
| Â Â Â Bandwidth | 350 MHz (-3 dB) | ||
| Â Â Â Crosstalk | -70 dB @ 10 MHz | ||
| Â Â Â Switching speed | 5 ms (max.) | ||
| Video input | |||
| Â Â Â Number/signal type | |||
| Â Â Â Â Â Â SW2 RGBHV/RGBHV A | 2 RGBHV, RGBS, RGsB, RsGsBs, HDTV component video, S-video, composite video (or digital audio) | ||
| Â Â Â Â Â Â SW4 RGBHV/RGBHV A | 4 RGBHV, RGBS, RGsB, RsGsBs, HDTV component video, S-video, composite video (or digital audio) | ||
| Â Â Â Â Â Â SW6 RGBHV/RGBHV A | 6 RGBHV, RGBS, RGsB, RsGsBs, HDTV component video, S-video, composite video (or digital audio) | ||
| Â Â Â Connectors | |||
| Â Â Â Â Â Â SW2 RGBHV/RGBHV A | 2 x 5 female BNC | ||
| Â Â Â Â Â Â SW4 RGBHV/RGBHV A | 4 x 5 female BNC | ||
| Â Â Â Â Â Â SW6 RGBHV/RGBHV A | 6 x 5 female BNC | ||
| Â Â Â Nominal level | 1.0 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB and for R-Y and B-Y of component video 0.3 Vp-p for C of S-video |
||
| Â Â Â Minimum/maximum levels | Analog: 0.3 V to 1.5 Vp-p with no offset | ||
| Â Â Â Impedance | 75 ohms | ||
| Â Â Â Return loss | <-30 dB @ 10 MHz | ||
| Â Â Â DC offset (max. allowable) | 5.0V | ||
| Â Â Â Input coupling | DC | ||
| Video output | |||
| Â Â Â Number/signal type | 1 RGBHV, RGBS, RGsB, RsGsBs, HDTV component video, S-video, composite video (or digital audio) | ||
| Â Â Â Connectors | 5 female BNC | ||
| Â Â Â Nominal level | 1.0 Vp-p for Y of component video and S-video, and for composite video 0.7 Vp-p for RGB and for R-Y and B-Y of component video 0.3 Vp-p for C of S-video |
||
| Â Â Â Minimum/maximum levels | 0.5 V to 1.5 Vp-p (follows input) | ||
| Â Â Â Impedance | 75 ohms | ||
| Â Â Â Return loss | <-30 dB @ 10 MHz | ||
|    DC offset | ±5 mV maximum with input at 0 offset | ||
| Sync | |||
| Â Â Â Input type | RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level sync | ||
| Â Â Â Output type | RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level sync | ||
| Â Â Â Input level | Analog or TTL, 0.5 V to 5.0 Vp-p | ||
| Â Â Â Output level | 5.0 Vp-p, unterminated, for V output; H output follows input | ||
| Â Â Â Input impedance | 510 ohms for V input and unselected H input; the selected H input impedance is determined by the device connected to the H output. | ||
| Â Â Â Output impedance | 75 ohms for V output; the H output impedance is determined by the device connected to the selected H input. | ||
| Â Â Â Max. input voltage | 5.0 Vp-p | ||
| Â Â Â Max. propagation delay | 35 ns | ||
| Â Â Â Max. rise/fall time | 4 ns | ||
| Â Â Â Polarity | Positive or negative (follows input) | ||
| Audio — SW 2/4/6 RGBHV A only | |||
| Â Â Â Gain | -18 to +24 dB, adjustable When audio gain is set to unity (0 dB), balanced output will have a 0 dB gain; unbalanced output will be attenuated by 6 dB. |
||
|    Frequency response | 20 Hz to 20 kHz, ±0.05 dB | ||
| Â Â Â THD + Noise | 0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal level | ||
| Â Â Â S/N | >90 dB at maximum output | ||
| Â Â Â Crosstalk | <-65 dB @ 20 kHz, <-80 dB @ 1 kHz or below 60 Hz | ||
| Â Â Â Stereo channel separation | >80 dB @ 20 Hz to 20 kHz | ||
| Â Â Â CMRR | >75 dB @ 20 Hz to 20 kHz | ||
| Digital audio — all models’ H channel | |||
|    Input type | Dolby® Digital, DTS, AES/EBU | ||
| Â Â Â Output type | Dolby Digital, DTS, AES/EBU | ||
| Â Â Â Bandwidth | 250 MHz (-3 dB) | ||
| Â Â Â Sampling rates | 32, 44.1, 48, 96 kHz | ||
| Â Â Â Input level | 0.5 V to 5.0 Vp-p | ||
| Â Â Â Output level | 2.5 Vp-p (when terminated with 75 ohms) | ||
| Â Â Â Input impedance | 510 ohms for unselected inputs; for the selected input, impedance is determined by the device connected to the output | ||
| Â Â Â Output impedance | Determined by the device connected to the selected input | ||
| Â Â Â Max. input voltage | 5.0 Vp-p | ||
| Â Â Â Max. propagation delay | 35 ns | ||
| Â Â Â Max. rise/fall time | 4 ns | ||
|
|||
| Audio input — SW 2/4/6 RGBHV A only | |||
| Â Â Â Number/signal type | 2, 4, or 6 (depending on the model) stereo, balanced/unbalanced | ||
| Â Â Â Connectors | 2, 4, or 6 (depending on the model) 3.5 mm captive screw connectors, 5 pole | ||
| Â Â Â Impedance | >10k ohms unbalanced, 20k ohms balanced, DC coupled | ||
| Â Â Â Nominal level | -20 dBV (100 mVrms), -10 dBV (316 mVrms), 0 dBu (0.775 Vrms), or +4 dBu (1.23 Vrms), configurable |
||
| Â Â Â Maximum level | +20 dBu, (balanced or unbalanced) at 1% THD+N | ||
| Â Â Â Input gain adjustment | -24 dB to +18 dB, adjustable per input | ||
| Â Â Â Input coupling | DC | ||
| Audio output — SW 2/4/6 RGBHV A only | |||
| Â Â Â Number/signal type | 1 stereo, balanced/unbalanced | ||
| Â Â Â Connectors | (1) 3.5 mm captive screw connector, 5 pole | ||
| Â Â Â Impedance | 50 ohms unbalanced, 50 ohms balanced | ||
| Â Â Â Nominal level | -10 dBV (316 mV) or +4 dBu (1.23 V), configurable | ||
| Â Â Â Maximum level (Hi-Z) | >26 dBu, balanced; >+20 dBu, unbalanced at 1% THD+N | ||
| Â Â Â Maximum level (600 ohm) | >+21 dBm, balanced; >+15 dBm, unbalanced at 1% THD+N | ||
| Control/remote — switcher | |||
| Â Â Â Serial control port | RS-232, female 9-pin D connector (same as the contact closure port) | ||
| Â Â Â Baud rate and protocol | 9600 baud, 8 data bits, 1 stop bit, no parity | ||
| Â Â Â Serial control pin configuration | 2 = TX, 3 = RX, 5 = GND | ||
| Â Â Â Contact closure | 1 female 9-pin D connector (same as the RS-232 port) | ||
| Â Â Â Contact closure pin configuration | 1 = input #1, 4 = input #2, 6 = input #3, 7 = input #4, 8 = input #5, 9 = input #6 | ||
|    Program control | Extron control/configuration program for Windows® Extron Simple Instruction Set (SIS™) |
||
| General | |||
| Â Â Â Power | 100 VAC to 240 VAC, 50-60 Hz, 20 watts, internal | ||
|    Temperature/humidity | Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, non-condensing Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, non-condensing |
||
| Â Â Â Cooling | Convection, no vents | ||
| Â Â Â Rack mount | |||
| Â Â Â Â Â Â SW2 RGBHV, SW2 RGBHV A | Yes, with optional 1U deep rack shelf | ||
| Â Â Â Â Â Â All other models | Yes, with included mounting kit | ||
| Â Â Â Enclosure type | Metal | ||
| Â Â Â Enclosure dimensions | |||
| Â Â Â Â Â Â SW2 RGBHV, SW2 RGBHV A | 1.75″ H x 8.75″ W x 9.5″ D (1U high, half rack wide) 4.4 cm H x 22.2 cm W x 24.1 cm D (Depth excludes connectors.) |
||
| Â Â Â Â Â Â All other models | 1.75″ H x 17.5″ W x 8.5″ D (1U high, full rack wide) 4.4 cm H x 44.5 cm W x 21.6 cm D (Depth excludes connectors.) |
||
| Â Â Â Product weight | |||
| Â Â Â Â Â Â SW2 RGBHV | 2.4 lbs (1.1 kg) | ||
| Â Â Â Â Â Â SW2 RGBHV A | 2.5 lbs (1.1 kg) | ||
| Â Â Â Â Â Â All other models | 7.0 lbs (3.2 kg) | ||
| Â Â Â Shipping weight | |||
| Â Â Â Â Â Â SW2 RGBHV, SW2 RGBHV A | 5 lbs (3kg) | ||
| Â Â Â Â Â Â All other models | 12 lbs (6 kg) | ||
| Â Â Â Vibration | ISTA 1A in carton (International Safe Transit Association) | ||
| Â Â Â Regulatory compliance | |||
| Â Â Â Â Â Â Safety | CE, c-UL, UL | ||
| Â Â Â Â Â Â EMI/EMC | CE, C-tick, FCC Class A, ICES, VCCI | ||
-
DVI Switcher
-
HDMI 1.3 DA
-
HDMI 1.3 DA
-
HDMI DA
-
HDMI DA
-
HDMI 1.3 DA
-
Dual-Link DVI Splitter
-
DVI DA
-
VGA DA/Splitter
-
1x4 VGA DA
Rent from a Partner, Not a Competitor
24/7 Sales
& Technical support
Same Day Delivery
to Most Major Cities
Competitive
Subrental Pricing
A Large Inventory of
High-Quality Equipment
Best-in-Class
QC Process
Rentex Locations
With locations across the country, Rentex can deliver to most major cities.
