Extron 6×1

RGBHV Switcher

Extron

Product Highlights

  • 350 MHz (-3 dB) RGB video bandwidth
  • Compatible with RGBHV, RGBS, RGsB, RsGsBs, HDTV component video, S-video, and composite video signals
  • Automatically detects which inputs have an active signal and reports this information through the RS-232 port
  • Inputs: Two, four, and six input analog RGBHV models with or without stereo audio; video on BNC connectors; audio on captive screw connectors
  • Output: One set of female BNC connectors for video; one captive screw connector for audio
Rentex No. SWRGBHV6X | Mfr No. 60-493-21

The Extron SW6 RGBHV is a high performance, six input RGBHV switcher using BNC connectors. The switcher allows multiple RGBHV, RGBS, RGsB, RsGsBs, HDTV component video, S-video, or composite video sources to be switched to one compatible display device. With 350 MHz (-3 dB) RGB video bandwidth, it supports a wide array of high resolution signals.The SW6 RGBHV provides multiple control options including front panel, RS-232, contact closure, and auto-input switching. The auto-input switch function can be enabled or disabled via a toggle switch on the back panel. The SW6 RGBHV is housed in a 1U, rack-mountable metal enclosure and ships with rack ears.

The SW6 RGBHV can be controlled through a 9-pin remote control port which enables RS-232 control, as well as contact closure control. It is also compatible with the Extron KP 6 Keypad Remote Control and the Extron IR 102 Kit IR remote.

There are no Technical Documents available at the moment.
Please call us at (800) 574-1702 for more information.
SW2/4/6 RGBHV and SW2/4/6 RGBHV A
Video
   Gain Unity.
   Bandwidth 350 MHz (-3 dB)
   Crosstalk -70 dB @ 10 MHz
   Switching speed 5 ms (max.)
Video input
   Number/signal type
      SW2 RGBHV/RGBHV A 2 RGBHV, RGBS, RGsB, RsGsBs, HDTV component video, S-video, composite video (or digital audio)
      SW4 RGBHV/RGBHV A 4 RGBHV, RGBS, RGsB, RsGsBs, HDTV component video, S-video, composite video (or digital audio)
      SW6 RGBHV/RGBHV A 6 RGBHV, RGBS, RGsB, RsGsBs, HDTV component video, S-video, composite video (or digital audio)
   Connectors
      SW2 RGBHV/RGBHV A 2 x 5 female BNC
      SW4 RGBHV/RGBHV A 4 x 5 female BNC
      SW6 RGBHV/RGBHV A 6 x 5 female BNC
   Nominal level 1.0 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
   Minimum/maximum levels Analog: 0.3 V to 1.5 Vp-p with no offset
   Impedance 75 ohms
   Return loss <-30 dB @ 10 MHz
   DC offset (max. allowable) 5.0V
   Input coupling DC
Video output
   Number/signal type 1 RGBHV, RGBS, RGsB, RsGsBs, HDTV component video, S-video, composite video (or digital audio)
   Connectors 5 female BNC
   Nominal level 1.0 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
   Minimum/maximum levels 0.5 V to 1.5 Vp-p (follows input)
   Impedance 75 ohms
   Return loss <-30 dB @ 10 MHz
   DC offset ±5 mV maximum with input at 0 offset
Sync
   Input type RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level sync
   Output type RGBHV, RGBS, RGsB, RsGsBs, bi-level and tri-level sync
   Input level Analog or TTL, 0.5 V to 5.0 Vp-p
   Output level 5.0 Vp-p, unterminated, for V output; H output follows input
   Input impedance 510 ohms for V input and unselected H input; the selected H input impedance is determined by the device connected to the H output.
   Output impedance 75 ohms for V output; the H output impedance is determined by the device connected to the selected H input.
   Max. input voltage 5.0 Vp-p
   Max. propagation delay 35 ns
   Max. rise/fall time 4 ns
   Polarity Positive or negative (follows input)
Audio — SW 2/4/6 RGBHV A only
   Gain -18 to +24 dB, adjustable
When audio gain is set to unity (0 dB), balanced output will have a 0 dB gain; unbalanced output will be attenuated by 6 dB.
   Frequency response 20 Hz to 20 kHz, ±0.05 dB
   THD + Noise 0.03% @ 1 kHz, 0.3% @ 20 kHz at nominal level
   S/N >90 dB at maximum output
   Crosstalk <-65 dB @ 20 kHz, <-80 dB @ 1 kHz or below 60 Hz
   Stereo channel separation >80 dB @ 20 Hz to 20 kHz
   CMRR >75 dB @ 20 Hz to 20 kHz
Digital audio — all models’ H channel
   Input type Dolby® Digital, DTS, AES/EBU
   Output type Dolby Digital, DTS, AES/EBU
   Bandwidth 250 MHz (-3 dB)
   Sampling rates 32, 44.1, 48, 96 kHz
   Input level 0.5 V to 5.0 Vp-p
   Output level 2.5 Vp-p (when terminated with 75 ohms)
   Input impedance 510 ohms for unselected inputs; for the selected input, impedance is determined by the device connected to the output
   Output impedance Determined by the device connected to the selected input
   Max. input voltage 5.0 Vp-p
   Max. propagation delay 35 ns
   Max. rise/fall time 4 ns
    NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio input — SW 2/4/6 RGBHV A only
   Number/signal type 2, 4, or 6 (depending on the model) stereo, balanced/unbalanced
   Connectors 2, 4, or 6 (depending on the model) 3.5 mm captive screw connectors, 5 pole
   Impedance >10k ohms unbalanced, 20k ohms balanced, DC coupled
   Nominal level -20 dBV (100 mVrms), -10 dBV (316 mVrms), 0 dBu (0.775 Vrms), or
+4 dBu (1.23 Vrms), configurable
   Maximum level +20 dBu, (balanced or unbalanced) at 1% THD+N
   Input gain adjustment -24 dB to +18 dB, adjustable per input
   Input coupling DC
Audio output — SW 2/4/6 RGBHV A only
   Number/signal type 1 stereo, balanced/unbalanced
   Connectors (1) 3.5 mm captive screw connector, 5 pole
   Impedance 50 ohms unbalanced, 50 ohms balanced
   Nominal level -10 dBV (316 mV) or +4 dBu (1.23 V), configurable
   Maximum level (Hi-Z) >26 dBu, balanced; >+20 dBu, unbalanced at 1% THD+N
   Maximum level (600 ohm) >+21 dBm, balanced; >+15 dBm, unbalanced at 1% THD+N
Control/remote — switcher
   Serial control port RS-232, female 9-pin D connector (same as the contact closure port)
   Baud rate and protocol 9600 baud, 8 data bits, 1 stop bit, no parity
   Serial control pin configuration 2 = TX, 3 = RX, 5 = GND
   Contact closure 1 female 9-pin D connector (same as the RS-232 port)
   Contact closure pin configuration 1 = input #1, 4 = input #2, 6 = input #3, 7 = input #4, 8 = input #5, 9 = input #6
   Program control Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS)
General
   Power 100 VAC to 240 VAC, 50-60 Hz, 20 watts, internal
   Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, non-condensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, non-condensing
   Cooling Convection, no vents
   Rack mount
      SW2 RGBHV, SW2 RGBHV A Yes, with optional 1U deep rack shelf
      All other models Yes, with included mounting kit
   Enclosure type Metal
   Enclosure dimensions
      SW2 RGBHV, SW2 RGBHV A 1.75″ H x 8.75″ W x 9.5″ D (1U high, half rack wide)
4.4 cm H x 22.2 cm W x 24.1 cm D
(Depth excludes connectors.)
      All other models 1.75″ H x 17.5″ W x 8.5″ D (1U high, full rack wide)
4.4 cm H x 44.5 cm W x 21.6 cm D
(Depth excludes connectors.)
   Product weight
      SW2 RGBHV 2.4 lbs (1.1 kg)
      SW2 RGBHV A 2.5 lbs (1.1 kg)
      All other models 7.0 lbs (3.2 kg)
   Shipping weight
      SW2 RGBHV, SW2 RGBHV A 5 lbs (3kg)
      All other models 12 lbs (6 kg)
   Vibration ISTA 1A in carton (International Safe Transit Association)
   Regulatory compliance
      Safety CE, c-UL, UL
      EMI/EMC CE, C-tick, FCC Class A, ICES, VCCI

Rent from a Partner, Not a Competitor

24/7 Sales
& Technical support

24/7 Audio Video Rentals

Same Day Delivery
to Most Major Cities

24/7 Audio Video Rentals

Competitive
Subrental Pricing

24/7 Audio Video Rentals

A Large Inventory of
High-Quality Equipment

24/7 Audio Video Rentals

Best-in-Class
QC Process

24/7 Audio Video Rentals