View cart “AJA Ki Pro” has been added to your cart.

Extron P/2 DA4 Plus

1x4 VGA DA

Mouse roll-over to zoom image.

Product Highlights

Video Bandwidth: 350MHz
Compatible with VGA-QXGA resolutions
Input: 1 female 15-pin HD connector
Output: Four female 15-pin HD connectors

Rentex No. VGADA4E | Mfr No. 60-246-01

The Extron P/2 DA4xi is a one input VGA distribution amplifier that splits a signal and distributes it to four separate outputs. With 350MHz (-3dB) RGB video bandwidth, fully loaded, the P/2 DA4xi is compatible with VGA-QXGA graphic cards, projectors and flat panel displays. Each output is individually buffered and amplified to help maintain the original signal integrity and eliminate noise interference.

Rentex Spec 60-246-01

Extron P/2 DA4 Plus Specifications

Video
Gain	0.7V or 1.0V, switchable
Bandwidth	300 MHz (-3dB), fully loaded
Video input
Number/signal type	1 VGA-UXGA: RGBHV, RGBS, RGsB, RsGsBs
Connectors	(1) 15-pin HD female (optional Mac/VGA adapters are available)
Nominal level	0.7V p-p for RGB
Minimum/maximum levels	Analog: 0.3V to 1.5V p-p with no offset at unity gain
Impedance	75 ohms
Horizontal frequency	15 kHz to 135 kHz
Vertical frequency	30 Hz to 150 Hz
Return loss	<-45dB @ 5 MHz
Video output
Number/signal type	P/2 DA4 PLUS: 4 VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs
P/2 DA6 PLUS	6 VGA-UXGA: RGBHV, RGBS, RGsB, RsGsBs
Connectors	(4 or 6) 15-pin HD female (depending on the model)
Minimum/maximum levels	0.3V to 1.5V p-p
Nominal level	0.7V p-p for RGB
Impedance	75 ohms
Return loss	<-45dB @ 5 MHz
DC offset	±5mV maximum with input at 0 offset
Sync
Input type	RGBHV, RGBS, RGsB, RsGsBs
Output type	RGBHV, RGBS, RGsB, RsGsBs
Input level (min./max.)	3.0V to 5.0V p-p
Output level	TTL: 5.0V p-p, unterminated
Input impedance	510 ohms
Output impedance	75 ohms
Max. propagation delay	60 ns
Max. rise/fall time	2 ns
Polarity	Positive or negative
General
Power	100VAC to 240VAC, 50/60 Hz, 12 watts, internal, autoswitchable
Temperature/humidity	Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, non-condensing
	Operating +32° to +122°F (0° to +50°C) / 10% to 90%, non-condensing
Rack mount	Yes, with optional 1U rack shelf, part #60-190-01
Enclosure type	Metal
Enclosure dimensions	1.6″ H x 8.7″ W x 9.4″ D: (1U high, half rack width)
	4.1 cm H x 22.1 cm W x 23.9 cm D
	(Depth excludes connectors.)
Product weight	2.2 lbs (1.0 kg)
Shipping weight
P/2 DA4 PLUS	4 lbs (2 kg)
P/2 DA6 PLUS	5 lbs (3 kg)
Vibration	ISTA/NSTA 1A in carton (International Safe Transit Association)
Listings	UL, CUL
Compliances	CE
MTBF	30,000 hours